[

Nyheter

Matek Systems PDB-XT60

Pris: 69 kr
Exkl moms: 55 kr
Märke:  Matek
Artikelnummer:  65387
Tillgänglighet:  Finns i lager

The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
It offers a XT60 socket to connect the LiPo pack conveniently.


Description:

  • Input voltage range (3S-4S LiPo operation): 9 - 18V DC
  • Regulated 5V and 12V outputs
  • LED power indicators ( 5V & 12V outputs )
  • 6 ESC outputs & 1 pair VCC/GND pads

 
ESC outputs:

  • Continuous current: 25A*4 or 15A*6
  • Peak current (10 seconds/minute): 30A*4 or 20A*6

 
BEC 5V output:

  • Designed for RC Receivers, Flight controllers, OSD, and Servos.
  • DC/DC synchronous buck regulator.
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 2 Amps (Max.2.5A 10s/minute)
  • Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
  • Short-circuit tolerant (5 seconds/minute)

 
BEC 12V output:

  • Designed for Video TX or FPV camera with linear regulator.
  • The battery should be 4S LiPo (13~18V DC)
  • Voltage: 12.0 +/- 0.3VDC
  • Continuous current: 500mA (Max.0.8A 5s/minute)
  • Short-circuit tolerant (2 seconds/minute)

 
BEC 12V @ 3S LiPo

  • Output voltage= 3S LiPo voltage -1V

 
Physical:

  • Dimensions: 36 x 50 x 4 mm (without XT60)
  • Mounting: 30.5 x 30.5mm, Φ3mm
  • Weight: 7.5g(w/o XT60), 11g(w/ XT60)

 

Features:

2oz copper, 4-layers &1.6mm PCB.
Built-in XT60 Socket
Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant
 
Package included:
1 x Matek Systems PDB-XT60

Skriv en recension

Ditt namn:
Din recension:
OBS: HTML översätts inte!

Betyg: Dålig            Utmärkt

Ange koden i rutan nedan:



Storsäljare